Superior Turf Maintenance Equipment....   Engineered for Professionals

G

R

E

E

N

S

&

F

A

I

R

W

A

Y

S

Engineered to Fit

John Deere Triplex Mower Models 2243 and 2500 for greens & Models 3215A and 3235B for fairways using thatching reels 04416 and 04493

John Deere Part Number ATM2703 & ET17719

Recommended Spacers

• Standard spacer width - 1/4"

• Use any combination of 2 or more spacers - minimum of 2 spacers must be used between blades

• 3 spacers is the standard John Deere configuration

dynaBLADE Specifications

DB2-R01 - 5/64" (2mm) tungsten carbide tip width

DB2-S01 - 3/64" (1.2mm) tungsten carbide tip width

Tip Length - 1/4" (6.4mm)

11 tips per blade

6 fins per blade

Blades Required

• 1/2" spacing requires 117 blades per set

• 3/4" spacing requires 81 blades per set

• 1" spacing requires 63 blades per set

• 1 1/2" spacing requires 42 blades per set

F

A

I

R

W

A

Y

Engineered to Fit

John Deere Fairway Mower Models 3225B & 3235B

John Deere Part Number MT6987

dynaBLADE Specifications

5/64" (2mm) tungsten carbide tip width

Tip Length - 1"

5 tips per blade

F

A

I

R

W

A

Y

Engineered to Fit

John Deere Gang Mower Models 305 & 365

John Deere Part Number ET17647

dynaBLADE Specifications

5/64" (2mm) tungsten carbide tip width

Tip Length - 1"

5 tips per blade

Part No. DB0-R11

G

R

O

O

M

E

R

Engineered to Fit

John Deere Models 2243 and 2500 greens mowers, 180 A & B, 200 A & B, 220 and 260

John Deere Part Number ET14707

dynaBLADE Specifications

3/64" (1.2mm) tungsten carbide tip width

Tip Length  1/4" (6.4mm)

6 tips per blade

Part No. DB0-R05

S

P

I

K

I

N

G

Engineered to Fit

John Deere Models 2243 and 2500 for greens & Models 3215A and 3235A for fairways

dynaBLADE Specifications

No carbide tips

Spiking Blades make aeration slits which increase water and fertilizer penetration, help relieve surface compaction and encourage new growth. The blades mount on verti-cutting heads and can be spaced to suit your turf and weather conditions. Between 33 (2' spacing) and 60 (1" spacing) blades are required to set up three mower cutting heads. The power drives to the heads must be disconnected in order for the spiking blades to work properly.  The drive wheels of the mower provide the power and the blades roll on the green or fairway at the desired speed. The weight of the heads can drive the spikes up to 1 1/2" into the turf. The height controls for the heads can be set to reduce the penetration.