Superior Turf Maintenance Equipment....   Engineered for Professionals

G

R

E

E

N

S

&

F

A

I

R

W

A

Y

S

Engineered to Fit

Jacobsen Greens King I, II, IV, and V for greens & LF100, 123 and 128 for fairways

Jacobsen Part Number 335449

Recommended Spacers

• Standard spacer width - 1/4"

• Use any combination of 2 or more spacers - minimum of 2 spacers must be used between blades

• 3 spacers is the standard Jacobsen configuration

dynaBLADE Specifications

DB2-R04 - 5/64" (2mm) tungsten carbide tip width

DB2-S04 - 3/64" (1.2mm) tungsten carbide tip width

Tip Length - 1/4" (6.4mm)

11 tips per blade

6 fins per blade

Blades Required

• 1/2" spacing requires 116 blades per set

• 3/4" spacing requires 76 blades per set

• 1" spacing requires 58 blades per set

• 1 1/2" spacing requires 40 blades per set

Part No. DB0-R25

G

R

E

E

N

S

Engineered to Fit

Jacobsen Greensmower 422, 518 & 522 (open shaft) & 19" and 22" walk behind mowers

Jacobsen Part Number  R101160

dynaBLADE Specifications

5/64" (2mm) tungsten carbide tip width

Tip Length - 1/4" (6.4mm)

9 tips per blade

Part No. DB0-R19

F

A

I

R

W

A

Y

Engineered to Fit

Jacobsen Model LF3810 - Open Shaft Slot Style

Jacobsen Part Number 3007138

dynaBLADE Specifications

5/64" (2mm) tungsten carbide tip width

Tip Length - 1"

9 tips per blade

Part No. DB0-R26

G

R

O

O

M

E

R

Engineered to Fit

Jacobsen Greens King I, II, IV, and V for greens & LF100, 123 and 128 for fairways

Jacobsen Part Number 365230

dynaBLADE Specifications

3/64" (1.2mm) tungsten carbide tip width

Tip Length  1/4" (6.4mm)

6 tips per blade

Part No. DB0-R10

S

P

I

K

I

N

G

Engineered to Fit

Jacobsen Greens King I, II, IV, and V for greens & LF100, 123 and 128 for fairways

dynaBLADE Specifications

No carbide tips

Spiking Blades make aeration slits which increase water and fertilizer penetration, help relieve surface compaction and encourage new growth. The blades mount on verti-cutting heads and can be spaced to suit your turf and weather conditions. Between 33 (2' spacing) and 60 (1" spacing) blades are required to set up three mower cutting heads. The power drives to the heads must be disconnected in order for the spiking blades to work properly.  The drive wheels of the mower provide the power and the blades roll on the green or fairway at the desired speed. The weight of the heads can drive the spikes up to 1 1/2" into the turf. The height controls for the heads can be set to reduce the penetration.